In many cases, the discharge of large amounts of feces from poultry farms and cows and horses in farms also has an odor, which is a serious influence on the air and the surrounding environment. Not only can it have a negative impact on human health, but it can also cause pollution in water resources. Therefore, it is an urgent matter to solve the problem of farm animal waste. Immediately afterwards, experts were asked to analyze the key roles of manure drip machines in the treatment of animal manure in farms.
First of all, analyze the working principle of the manure removal machine. First, the manure siphons are siphoned out of the septic tank and the digester through a negative pressure by mechanical negative pressure and centrifugal gravity. In addition, the sewage discharge is also very effective, then, in many cases, the manure suction pump is inseparable from the vacuum pump. Although the auger-type manure machine can effectively prevent and avoid the obstruction of the inlet, the cost of this type of manure extractor is very high. And, the cost is also great.
Immediately afterwards, experts were asked to analyze what the purpose of the manure removal machine was. Specific selection of hot-dip galvanizing advanced processes. Then, the manure extraction machine can well extract the sewage, garbage in the biogas septic tank, and excrement, and the average service life is more than fifteen years. Moreover, for some severely polluted areas, there are cold and hot areas, and they all work well. Therefore, the corrosion resistance as well as the acid resistance, oxidation resistance and the like are also very strong.
In many cases, manure extraction leads to secondary pollution, mainly because no return device is installed. A good manure machine is often equipped with a return device, so that a good circumvention also eliminates the inhalation of manure, as well as secondary pollution and return of the garbage. A relatively good manure machine, often between one minute and two minutes, can collect manure and sewage up to one to three cubic meters, so the work efficiency is also very high.
Therefore, to sum up, for the large area of ​​some sewage discharge environments, auger type manure removal machines are often more suitable for use in these areas.
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
PVC Edge Banding,Edge Banding Pvc,Pvc U Trim Edge Banding,Pvc Edge Banding Trimmer
Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com