| No. |       item | Parameter(all is subject to our final design) | |
| 1 Â |
Suitable raw material | Type | Common galvanized & pre-painted steel |
| Yield strength | 235MPa(or other high strength steel) | ||
| Thickness(mm) | 0.4-0.7 | ||
| width(mm) | According to final design | ||
| 2 | Manual uncoiler's capacity | Max.5tons | |
| 3 | Forming speed(m/min) | About 18-20m/min | |
| 4 | Main motor power(KW) | 7.5kw | |
| 5 | Hydraulic power(KW) | 3kw | |
| 6 | Forming roller groups | Around19-20 groups | |
| 7 | Raw material of forming roller | High quality No.45 steel | |
| 8 | Raw material of cutting blade | Cr12mould steel with quenched treatment | |
| 9 | controlling system | Mitsubishi PLC& converter | |
| 10 | Suitable industrial voltage |  According to your special requirement | |
| 11 | Machine dimensions(L*W*H) | 6.8m×1.8m×1.52m | |
| 12 | Machine weight | About 9-10tons | |
Components:
- The uncoiler and its base
- Coil sheet guiding and adjusting equipment
- Film covered device
- Main roll forming system
- Post- Cutting device
- Hydraulic station
- PLC control System
- Support table
Material of Roll former system:
- Roller: High grade No. 45 forged steel, plated hard chromed on the surface of rollers with thickness 0.05mm.
- Active shaft material: High grade No. 45 carbon wrought steel at diameter 75mm.
- Cutting blade: Cr12 mould steel with quenched treatment.
Working flow:
Decoiling the sheet- - - Guiding the sheet- - - Covering the film- - - Roll forming- - - Measuring the length- - - Cutting the panel- - - Panels to the supporter.
Our machine's warranty time:
We offer 12 months quality grantee time starting from the date of delivery. When delivery, we will ship a set of wearing parts for free; Within the warranty period, maintenance of equipments and replacement of parts of equipment are charge-free.
After-sale service:
We offer sale after service for life. The machine will be inspected well in our workshop before delivery. We will send one technician to your factory to install the machine if you need extra installation, training service; The seller should arrange offer technical back-up and assign a technician people to the buyer's part.
Medium Frequency Induction Heating Machine
Medium Frequency Heating Machine using the principle of electromagnetic induction, eddy current is generated in the workpiece placed in the induction coil, so that the workpiece is hot and heated to the required temperature. The equipment adopts series resonance or parallel resonance, so the power factor is higher. Compared with the traditional heating method, it has the advantages of high efficiency and less pollution. The Medium Frequency Heating Machine shell is made of high-quality aluminum-zinc-coated plate, which is one of the plates that is not easy to corrode and has strong heat resistance. 304 or 316 stainless steel plate can also be customized according to special needs. Intermediate Frequency Heating Equipment has the advantages of small size, light weight, high efficiency, Simple operation, energy saving and environmental protection, stable operation, fast heating, strong heating penetration,excellent thermal processing quality and favorable environment, is a new generation of metal heating equipment. Intermediate Frequency Heating Equipment Application: Street brazing of copper tubes, composite pot bottom brazing, diamond tool brazing, heat treatment of small workpieces, heating forging of small workpieces, annealing and drawing of stainless steel, electrical and electronic or rotor heating and heat fitting.
Medium,Frequency Induction,Medium Heating Machine,Medium Frequency Heater
Ningbo Yufeng Electronics Co., Ltd , https://www.yufengheating.com