Explicit high current generator technical parameters and precautions for use

Explicit high-current generator usage precautions:

1. At least two people are involved in the test. One person operates and one person supervises operations to ensure safety.

2. The housing must be grounded. Do not neglect safety precautions to prevent personal injury due to low voltage.

3. Proper conductor secondary to the test object conductor should not be too long, the cross-sectional area should be sufficient (current density can be considered 6-8A/mm) contact surface to be clean (a fine gauze can be used to light), otherwise the connector heat, or even The current rises less than the rated value.

4. Before working, check that the power supply has enough capacity, or the power cord is hot and the voltage is lowered and affect normal operation.

5. The work site should not have flammable materials. Temperature rise test should prepare enough fire extinguishing equipment.

6. Continuity (heating) test, on-site personnel should be on duty. And regularly check the source of rising equipment, wires, joints, fever, make a good record. Due to changes in the grid voltage, attention is paid to adjusting TD in order to maintain the rated test current.

7. The test work shall comply with the relevant provisions of the electrical safety work regulations and formulate practical safety measures.

Digital display large current generator technical parameters:

model

TSLQ

Rated Capacity

(KVA)

Riser

Rated input

Riser

Rated output

Impedance voltage

No-load current

Phase current error

<

structure type

Regulator

Riser

Current A

Voltage V

Current A

Voltage V

9/1000

9

9

12

380

1,000

5

<8

<6

0.1

One body/split body

20/2000

20

20

26.8

380

2000

5

<8

<6

0.1

Split

35/4000

35

35

46.9

380

4000

5

<8

<6

0.1

Split

45/5000

45

45

60

380

5000

5

<8

<6

0.1

Split

100/10000

100

100

135

380

10000

5

<8

<6

0.1

Split