The Shanghai-Kunming Expressway in Nanchang, where two vehicles collided with nearly 1,000 vehicles was blocked (Figure)

At 9:30 pm on the evening of the 23rd, a large truck with the license plate No. NR828 collided with a van with the license plate number 赣CIM828, collided with the high-speed guardrail, and the front of the two vehicles had already exited the highway. The van’s cab was severely deformed, and the two were stuck in the car and could not move. The road section was forced to close, nearly a thousand vehicles were blocked and the road section was blocked up to six kilometers.

At 22:00, the officers and men of the Nanchang County Fire Brigade arrived at the scene after receiving the alarm. Due to the serious deformation of the front, the rescue space is small, and the cab is heavy, which brings great difficulty to the rescue. Afterwards, the high-speed traffic police transferred a crane, used a crane and a fire rescue vehicle to tow the van, expanded the space for rescue, and then used hydraulic dilators, shears, crowbars, and other tools to carefully care for the components of the steering wheel and trapped persons. Demolition, expand the space for activities.

At 2310, the first trapped person was rescued successfully. 24 Xu, the second trapped person was also successfully rescued, but the left leg was seriously injured and was quickly taken to the hospital. At the same time, the high-speed traffic lanes that were blocked were allowed to pass through the high-speed traffic police. (Finish)

Next:Installation, use and regulation of marine diesel generator sets
Prev:Alcohol tanker was struck by lightning and exploded and caused fire without any casualties