Why is a multifunctional sprayer called multifunctional? That is, it is a model that combines the two functions of spray insecticide and greening and spraying. It uses a new type of air-injection spray which is a new type of plant protection with high efficiency, high range, and good maneuverability. The machine is equipped with a spraying device system that can move up and down. After the liquid is pressurized by the water pump and the fan is used for secondary atomization, it can be used in landfills, green belts, garden trees, collection points, and other places to spray insecticides. The atomization distance is up to 50M. . And for the object is also has a strong liquid adhesion, penetration, but also can effectively save the amount of drugs to better reduce environmental pollution. It can well solve the problem of poor fogging effect, large liquid loss, low firing range, impact on insect killing rate, pollution of the environment, etc., of those Pengyao Zhangbao of conventional teachers. In addition to the pest-resistant operations used in trees, it can also be used in health and epidemic prevention, spraying chemical herbicides, etc., which solves the problems of traditional medicines such as high drug consumption, high noise, poor working conditions, and low work efficiency. Problems such as. So multi-functional spray car is the same as other vehicles, are required to carry out maintenance and maintenance in order to have a good operating environment, the following for the driver friends to briefly introduce the maintenance of multi-functional spray car precautions:
1. It is necessary to carry out relevant maintenance and maintenance according to the manufacturer's instructions for use of the vehicle.
2. When the multifunctional sprayer is performing maintenance, the sprinkler and the spray pump must not be allowed to idle for a long period of time without water. If it is necessary to idle for a long time, the pump should be injected properly. The amount of water.
3. In the north, the temperature in the east and the west will be relatively cold. After each use of the multi-purpose sprayer , the pipes and the remaining liquid in the pump need to be drained to avoid freezing the components.
4. If there is a gas leak in the pneumatic control system of the vehicle, but there is no way to eliminate it in time, you can unscrew the brass fittings from the car's gas reservoir and cut off the air circuit of the control system. . Use the plug to tighten the corresponding air hole above the air tank to avoid affecting the normal operation of the vehicle's brake system.
5. When the vehicle is parked for more than two months without being used for a long period of time, the vehicle should be inspected, maintained and maintained in strict accordance with the vehicle instruction manual before use. (Text / Sun Ni)
Household Gloves Formers apply to produce household gloves.
Hand Former,Household Glove Former,Household Glove Former Mold,Household Gloves Mold
ZIBO HAOXIANG CERAMICS TECHNOLOGY CO.,LTD. , https://www.haoxiangceramics.com