Cleaning the road sweeper is one of the main vehicles in the sanitation vehicle. Its appearance provides people with a good clean road effect. However, the long-term use of the sweeper sweeper and the longevity of the sweeper sweeper need to be maintained. , Let it maintain a state of novelty and utility for a long period of time, always have good working efficiency, and bring a good cleaning effect to the road as much as possible. So, how to maintain the cleaning sweeper ?
Maintenance cleaning sweeper method:
1. When using the sweeper, it is necessary to be able to control the main valve and the sub-valve well, to understand the correct operation method, to avoid the vehicle being injured due to the wrong operation, and to maintain the uniform speed of the main valve and the sub-valve. 1k5 to 1k8 is more suitable, too fast too low will not work.
2. When using sweeping sweepers, pay attention to the amount of water in the tank, especially when the cleaning workload is relatively large, and be able to add water in a timely manner; in the tank, add water to maintain at eight full minutes, too full It will spill over to the vehicle body while the vehicle is in motion, causing parts on the vehicle body to rust and corrode.
3. Every time you use the sweeper, you need to clean it. Even if you can't wash it every day, keep it clean at least once a week. If you do not clean the sweeper, its work efficiency will be greatly reduced.
4. Cleaning The main brush, nozzle, hydraulic oil, clutch limit device and other parts of the sweeper should be checked regularly, and damages should be promptly replaced.
5. Every time before sweeping the sweeping vehicle, it is necessary to be able to inspect the drive shaft and find that there are abnormal or loose parts that can be repaired in time so that no adverse consequences will occur. It is also necessary to regularly inspect the interior of the sweeper to clean the dirt, replace new parts, and replenish grease.
How to maintain the cleaning sweeper ? Maintenance sweeping sweeper is to start from the point of life, regular cleaning sweeper to a professional vehicle maintenance company for inspection and maintenance must also be done, so that Can help the vehicle to extend its life better.
RTJ Flange is a facing type of ANSI (ASME) B16.5 flange norms, facing type also have flat face FF and raised face RF, RTJ flanges usually used in flange type of Blank, Socket Weld and welding neck flanges, and RTJ facing type usually used in high rating class like class 600 900 1500 and 2500, ANSI B16.5 Flange standard is often see Rtj Flange type.
RTJ Flange
Rtj Flange,Rtj Flange Blind,Ring Type Joint Flanges,Socket Weld Flange Rtj
Jinan Hyupshin Flanges Co., Ltd , https://www.iflange.com