Zhang Jianrong, Director of the Special Equipment Safety Supervision Bureau of the General Administration of Quality Supervision, Inspection and Quarantine, said that while strengthening the supervision of the industry, the Bureau will speed up the establishment of the market withdrawal mechanism for the pressure vessel industry and change the situation in which pressure vessels forensics have made it easier to collect evidence. This is the information that the reporter obtained at the work conference of the China National Chemical Equipment Association’s 2007 National Pressure Vessel Manufacturing Unit held in Xi’an on March 17.
According to Zhang Jianrong, the focus of industry supervision in the future is to speed up the construction of a dynamic monitoring system. The four procedures for evidence collection, as well as the materials, design, manufacture, and installation of pressure vessel products, should be dynamically monitored in real time to reverse the development of new products. After emerged, the regulatory agencies still have no way of knowing the passive situation. At the same time, as soon as possible, the industry’s market withdrawal mechanism has been established, and unqualified products and enterprises have been thoroughly cleared out of the market in order to achieve the goal of regulating the industry order and improving the quality of pressure vessel products. To cope with the advancement of these two key tasks, the regulatory authorities will increase the monitoring of key monitoring equipment this year and increase the inspection of large-scale hydrogenation reactors, urea synthesis towers, liquefied natural gas equipment and other pressure-bearing equipment, and increase the number of special inspections. The quarantine agency's requirements and management efforts have also accelerated the pace of the construction of industry regulations.
It is understood that since the 2003 AQSIQ promulgated and implemented the special equipment administrative license, the production of special equipment including pressure vessels has entered the threshold and standard, and the order of the industry has been standardized. At present, there are about 1,300 pressure vessel manufacturers in China. With the stimulation of huge demand for equipment in the chemical industry in recent years, the pressure vessel manufacturing industry has experienced an unprecedented boom, and many companies have even appeared in short supply. The phenomenon. However, because of this, the overall quality level of pressure vessel products has shown a tendency of backwards, which is different from previous production safety accidents caused by improper operation. In the past two years, safety accidents caused by pressure vessel quality have occurred from time to time. At the same time, the current industry design, quality assurance, non-destructive testing, and welders and other types of engineering and technical personnel are scarce, and serious losses; some companies have poor quality of inspection and testing staff, and even in some qualified inspection and inspection agencies also have this undesirable phenomenon Some small companies and new enterprises have poor awareness of quality management, substandard products and companies lack market elimination mechanisms, and the industry is faced with the difficulty of obtaining permits and revoking documents.
According to Zhang Jianrong, the focus of industry supervision in the future is to speed up the construction of a dynamic monitoring system. The four procedures for evidence collection, as well as the materials, design, manufacture, and installation of pressure vessel products, should be dynamically monitored in real time to reverse the development of new products. After emerged, the regulatory agencies still have no way of knowing the passive situation. At the same time, as soon as possible, the industry’s market withdrawal mechanism has been established, and unqualified products and enterprises have been thoroughly cleared out of the market in order to achieve the goal of regulating the industry order and improving the quality of pressure vessel products. To cope with the advancement of these two key tasks, the regulatory authorities will increase the monitoring of key monitoring equipment this year and increase the inspection of large-scale hydrogenation reactors, urea synthesis towers, liquefied natural gas equipment and other pressure-bearing equipment, and increase the number of special inspections. The quarantine agency's requirements and management efforts have also accelerated the pace of the construction of industry regulations.
It is understood that since the 2003 AQSIQ promulgated and implemented the special equipment administrative license, the production of special equipment including pressure vessels has entered the threshold and standard, and the order of the industry has been standardized. At present, there are about 1,300 pressure vessel manufacturers in China. With the stimulation of huge demand for equipment in the chemical industry in recent years, the pressure vessel manufacturing industry has experienced an unprecedented boom, and many companies have even appeared in short supply. The phenomenon. However, because of this, the overall quality level of pressure vessel products has shown a tendency of backwards, which is different from previous production safety accidents caused by improper operation. In the past two years, safety accidents caused by pressure vessel quality have occurred from time to time. At the same time, the current industry design, quality assurance, non-destructive testing, and welders and other types of engineering and technical personnel are scarce, and serious losses; some companies have poor quality of inspection and testing staff, and even in some qualified inspection and inspection agencies also have this undesirable phenomenon Some small companies and new enterprises have poor awareness of quality management, substandard products and companies lack market elimination mechanisms, and the industry is faced with the difficulty of obtaining permits and revoking documents.
PTFE Seamless Fusing Machine Belt
Ptfe Seamless Fusing Machine Belt,Ptfe Fusing Machine Belt,2445*15Mm Ptfe Seamless Machine Belt,Anti-Staticptfe Fusing Machine Belt
Taixing Yingxing Composite Material Co.,Ltd , https://www.ptfecnyx.com