The metal material element analysis instrument can detect Si, Mn, P, Cr in various materials such as plain carbon steel, low alloy steel, high alloy steel, cast iron, steel, iron, non-ferrous metals, metal materials, ductile iron, and alloy cast iron. , Ni, Mo, Cu, Ti and other elements. Each element can store 99 working curves, brand computer computer control, full Chinese menu operation. It can meet the needs of metallurgy, machinery, chemical industry and other industries in the furnace, finished products, incoming materials and other aspects of the multi-element analysis.
First, the connection and power of the instrument Connect the mains power socket to the mains with the power cable, and ground the instrument reliably (otherwise it is easily disturbed and cause data fluctuation); Check if the liquid hose is installed firmly (do not put the liquid hose The outlet side is not in the waste liquid, so as not to discharge the liquid), and distilled water (reference liquid) is injected into the cuvette, the instrument power switch is turned on, the computer power is turned on, the QL-1000A application program is run, and the wavelength is initialized and adjusted.
Second, zero input and full-scale adjustment In the daily use of the instrument, it is necessary to adjust the zero and full-scale work, the general zero does not need to be adjusted frequently, and can be adjusted once after each power-on.
Zero input: Switch the sensitivity gear to gear position 0. Wait a moment, the zero value will be equal to the full scale value, and then shift the gear to gear position 1.
Fullness adjustment: Press full button to automatically refill.
First, the connection and power of the instrument Connect the mains power socket to the mains with the power cable, and ground the instrument reliably (otherwise it is easily disturbed and cause data fluctuation); Check if the liquid hose is installed firmly (do not put the liquid hose The outlet side is not in the waste liquid, so as not to discharge the liquid), and distilled water (reference liquid) is injected into the cuvette, the instrument power switch is turned on, the computer power is turned on, the QL-1000A application program is run, and the wavelength is initialized and adjusted.
Second, zero input and full-scale adjustment In the daily use of the instrument, it is necessary to adjust the zero and full-scale work, the general zero does not need to be adjusted frequently, and can be adjusted once after each power-on.
Zero input: Switch the sensitivity gear to gear position 0. Wait a moment, the zero value will be equal to the full scale value, and then shift the gear to gear position 1.
Fullness adjustment: Press full button to automatically refill.
Ozone Disinfection,Pumping Unit,Garage Equipment
3D Wheel Alignment Co., Ltd. , http://www.nswheelalignment.com