When starting the ball mill , the equipment shall be started in the reverse process sequence, and each device shall start up and then start the next one.
The operation of the ball mill must be checked frequently to check if the bearing temperature is too high (it should not exceed 60 degrees). If the temperature is too high, check it
Whether the lubricant is sufficient, whether the oil is brought to the journal, and whether the cooling water is smooth. If there is abnormal noise, check if the bolts are loose and the gears are engaged.
Is it normal? Observe the change of the current and voltage of the motor at any time and remove the abnormality in time.
In the operation of the ball mill, the feeding force should be adjusted according to the fineness of the material and the moisture of the material (dry grinding). When the material fineness increases, add
Large amount of feed; When the moisture of the material is large, reduce the amount of feed.
When the ball mill stops working, it shall stop according to the sequence of the process flow. The parking interval shall ensure that the materials are discharged from the equipment to avoid further
The material is started at the time of starting and the dust remover is stopped. If the parking time is long in winter, the cooling water in the bearing should be drained.
Zhengzhou Huaye Heavy Industry Machinery Co., Ltd. specializes in jaw crusher, impact crusher, pressure ball machine, mineral mixing barrel, dryer, ball mill
machine. To provide you with professional advice and quality after-sales service, welcome to consult! ! !
Source: Huaye Heavy
We have nearly 20 years of experience in the manufacture of agricultural machinery parts, including rubber injection molding and Stamping parts. We have our own Assembly workshop, so we can provide one-stop service to customers and save customers' time and costs. Casting and Machining process is widely used in agricultural machinery parts. In addition to casting and machining process, we have many other processes of Die Casting, Forging , stamping, injection molding , assembly and welding. We have our own design and technical team to provide a solid technical support and quality assurance. We are focusing on the development of agricultural machinery parts market, maybe we will meet in the United States Agricultural Machinery Exhibition.
Agricultural Equipment Parts,E-Coating Assembly Agricultural Machinery ,Galvanized Agricultural Equipment Parts,Mechanical Assembly Parts Of Agricultural Machinery
NINGBO UNITED MACHINE CO., LTD. , http://www.nbmachine.net